UPDATE: BACK ON MARKET now in Georgetown, SC (between Charleston and Myrtle)
New price $79k, no trailer but added a new NSS evo3 12" plotter, halo radar and chirp transducer.
you can email me at 1996albin28@gmail.com or send me a message here, thank you.
It is a1996 but has been re-powered with a Cummins 370 with only 236 hours. A list following (not exhaustive) are some of the highlights of what's been done.
Here is a link to a ton of pictures, the boat was a bit dirty but wanted to get some up today.
Pictures: https://drive.google.com/drive/folders/ ... sp=sharing
My plans were to have the topsides painted this October and all the non-skid redone with the same yard that just painted the hull sides, they did a fantastic job. All my personal efforts were spent on making the boat more useable for me and my family. For example, added a larger holding tank, engine heat exchanged heater in the pilothouse and more a/c.
Boat needs to be cleaned up from the trip to SC, I am having the non-skid touched up in the cockpit in the coming week(s).
Highlights:
1996 Albin 28TE
2010 Cummins 6BTA 370hp 236 hours
intercooler serviced, new impeller, noise blankets on turbo and manifold, engine alarms, new fuel lines, new fuel filtration system, ARP head bolts.
4 blade prop and spare 4 blade prop
mase 2.5 diesel generator (yanmar engine) 368 hours
2021
NSS Evo3 12" chartplotter and radar with chirp
Bottom paint
Top sides buffed and waxed
Hull sides painted professionally with Awlcraft stars and stripes blue
New Marinaire 14k btu reverse cycle a/c – can cool pilothouse with canvas on
bocashade top
radar arch was re powder-coated, hinged for easy on trailer transport and mast added holding radar, steaming light, tv antenna and xm antenna (not hooked up)
Just replaced rudder shaft (pitting on original wouldn't allow stuffing box to seal), stainless collar added and re-packed stuffing nut.
2019-2020
New canvas
New upholstery in and out
seadeck combing pads
kiwi grip on deck
led nav lights
remote spotlight
light bar for docking fore and aft
JL Audio stereo, 2 amps 9 speakers, 2 zones
New wiper motors and pantograph wiper arms
New fuel tank (old one had crevice corrosion) installed with 5200 and rubber strips per best practices.
All new helm gauges, wiring, switches, bilge indicator lights, high water alarms.
New holding tank (moved position to allow for 15 gallon), all new sanitation hoses and new toilet with macerator on seaparte switch from water fill
new shower sump box, ac condensate lines drain here
new anchor, 150ft chain, 150ft rode
new anchor windlass
new bomar hatch (old one would not stop leaking)
New plastic hatches and gaskets (old ones were faded)
vhf in cabin
separate stereo in cabin with speaker switch so either unit can play through cabin speakers
new microwave
added a control module to run fridge on 120 vac so you can turn batteries off and leave shore power on
battery isolator and combiner switches
new tackle centers
new bench seat and new helm seat
tides dripless shaft seal
fresh water pump
raw water washdown pump
Albin 28 TE Cummins 370hp
Moderator: Nancy
Forum rules
Links to external personal sites and photo hosting sites are allowed. Links to dealers, brokers, eBay, etc., will be edited/removed by the moderators.
We strongly encourage you post pictures and details directly within your ad.
Links to external personal sites and photo hosting sites are allowed. Links to dealers, brokers, eBay, etc., will be edited/removed by the moderators.
We strongly encourage you post pictures and details directly within your ad.
-
- Supporting Member
- Posts: 67
- Joined: Fri Mar 03, 2017 11:52 pm
- Home Port: sarasota
You do not have the required permissions to view the files attached to this post.
Last edited by boatruptcy on Sun Jan 02, 2022 8:34 am, edited 2 times in total.
-
- Supporting Member
- Posts: 67
- Joined: Fri Mar 03, 2017 11:52 pm
- Home Port: sarasota
travel lift loading, trailer fits perfectly and pulls great but you can't load without forklift or travel lift, at least I woudln't try it.
You do not have the required permissions to view the files attached to this post.
-
- Supporting Member
- Posts: 67
- Joined: Fri Mar 03, 2017 11:52 pm
- Home Port: sarasota
Hi, yes I'm on lake norman in Charlotte area. Sorry, I wasn't getting pm's for some reason, will respond to all today.
-
- Swabby
- Posts: 2
- Joined: Wed Aug 04, 2021 11:47 am
- Home Port: Charleston SC
- Location: Charleston SC
Hi, sent you a PM. Hope you received it
Thanks
Kelly
Thanks
Kelly
-
- Supporting Member
- Posts: 67
- Joined: Fri Mar 03, 2017 11:52 pm
- Home Port: sarasota
I am taking off market for now, it is being detailed this week, wet-sanding the cap and a few other things. I typed an update a week or so ago but guess I didn't submit the reply to the thread. Thanks.
I don't have a price for the trailer because I would only sell if the boat sells. 6-8k range I would imagine.
I don't have a price for the trailer because I would only sell if the boat sells. 6-8k range I would imagine.
-
- Supporting Member
- Posts: 67
- Joined: Fri Mar 03, 2017 11:52 pm
- Home Port: sarasota
-
- Supporting Member
- Posts: 67
- Joined: Fri Mar 03, 2017 11:52 pm
- Home Port: sarasota
Sold, thanks.
-
- Deckhand
- Posts: 6
- Joined: Mon Mar 28, 2022 8:16 pm
- Home Port: Island Park, NY
If this boat is still available I will buy it cash in hand! My wife and I were just heartbroken losing a 28TE due to failed survey, wet stringers and compromised motor.
This boat is perfect for our needs and I am willing to pay cash in hand immediately upon inspection. Thank you!
James
(516)660-7179
This boat is perfect for our needs and I am willing to pay cash in hand immediately upon inspection. Thank you!
James
(516)660-7179