• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Transporting a 1979 36 trawler

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
Shariparkhill
Swabby
Swabby
Posts: 4
Joined: Tue Apr 18, 2017 6:10 pm
Home Port: Gulfport, Florida

Transporting a 1979 36 trawler

Post by Shariparkhill »

I am planning on moving my 1979 albin 36 trawler and I was wondering does any one knows the height from keel to bridge less wind screen
jashmen
Gold Member
Gold Member
Posts: 102
Joined: Fri Sep 28, 2018 11:02 am
Home Port: bayville, nj

Re: Transporting a 1979 36 trawler

Post by jashmen »

Not off hand, but the only picture I've seen of one being transported had the whole bridge removed.
jleonard
Gold Member
Gold Member
Posts: 2115
Joined: Fri Sep 22, 2006 7:35 am
Home Port: Mystic, CT
Location: New Port Richey, FL

Re: Transporting a 1979 36 trawler

Post by jleonard »

My 40 was 14 1/2 feet. I was rafted to a 36 and we were pretty even.
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
Panhdjoe
Gold Member
Gold Member
Posts: 238
Joined: Fri Feb 12, 2010 8:53 pm
Home Port: Osprey Marina, Myrtle Beach SC
Location: Columbia SC

Re: Transporting a 1979 36 trawler

Post by Panhdjoe »

This is something I did some serious research on a few years back. Bottom line is that the upper bridge must be removed for any over the road truck transport. I was looking at some 36's on the great lakes. At that time bringing on back to South Carolina seemed more than we could do. Now I would do it without hesitation.
1983 36 classic
1995 192 Grady White w/ 150 Yamaha
2003 Boss 8'6" Dingy w/6 hp Suzuki
Post Reply

Return to “General Discussion”