Looking for an Albin 28’ Owners Manual

[thart1216]

We just bought a Y2K Albin 28’ and can’t find anything online that resembles an Owners manual. We have plenty of accessory manuals, engine, bow thrusters, etc., but zero on the actual boat.

Any suggestions will be appreciated.

Tom

[Norseman]

We just bought a Y2K Albin 28’ and can’t find anything online that resembles an Owners manual. We have plenty of accessory manuals, engine, bow thrusters, etc., but zero on the actual boat.

Any suggestions will be appreciated.

Tom

Will look in my files, there should be a booklet there that shows the layout with descriptions as well electrical and plumbing diagrams.
Also have original glossy brochures.
Will scan and get it online or emailed. Stay tuned.

[catalina_mike]

After donating I got access to the document area or whatever it's called. All I needed was there.

[Norseman]

After donating I got access to the document area or whatever it's called. All I needed was there.

Good idea, free access with a donation.

Looked in my files.
What I have is Technical bulletins on each system.
Also drawings and specs as well brochures.
This may all be available on the Forum.
For specific question upload and share a page or two, but too much to scan and email right now, in the middle of replacing my Jabsco macerator pump with a Raritan, frustrating job getting the old pump and hoses out. Took 3 hours including cutting hoses for new pump, cleaning, etc.
Will finish the installation tomorrow, hopefully..

[jschomig]

I plan to be operating an Albin 28 TE this coming season. I'm still trying to find where the seacocks for engine cooling system are located in the hull - for emergency shut off if ever needed.

[Nancy]

I plan to be operating an Albin 28 TE this coming season. I'm still trying to find where the seacocks for engine cooling system are located in the hull - for emergency shut off if ever needed.

You've asked this in a few different threads, and there have been answers posted here:
viewtopic.php?f=7&t=14037&p=94483#p94483

[tpilczak]

Hello, was there ever any luck with this? I am looking for a manual that has information on the prop shaft tube, etc. as I am getting ready to do a cutlass bearing. Thanks!