blindsquirrel wrote: ↑Mon Nov 16, 2020 1:30 pm Install was Seaboard. Gear Ratio is 1.56/1.57. Noticed that most Albin 28TE's run 4 blade prop.
what did seaboard have to say about it?
tony knows his stuff
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Repowered 28 TE with Cummins
-
go.boating
- Gold Member
- Posts: 60
- Joined: Thu Sep 08, 2016 4:02 pm
- Home Port: Little Torch Key, fl
- Contact:
Re: Repowered 28 TE with Cummins
what did seaboard have to say about it?
tony knows his stuff
-
blindsquirrel
- Deckhand
- Posts: 5
- Joined: Sat Oct 03, 2020 8:43 pm
- Home Port: Oceanside, CA
Re: Repowered 28 TE with Cummins
Also, any recommendations for a shop in So Cal that is good at prop sizing/selection?
-
go.boating
- Gold Member
- Posts: 60
- Joined: Thu Sep 08, 2016 4:02 pm
- Home Port: Little Torch Key, fl
- Contact:
Re: Repowered 28 TE with Cummins
does the boat reach max rpm at wot?
-
Ben423
- Gold Member
- Posts: 188
- Joined: Tue Feb 10, 2015 9:31 am
- Home Port: Two Harbors
- Location: Southern California
- Contact:
Re: Repowered 28 TE with Cummins
Wilmington Propeller Service. A full service shop for propellers big and small. Located in Wilmington, CA.blindsquirrel wrote: ↑Mon Nov 16, 2020 5:29 pm Also, any recommendations for a shop in So Cal that is good at prop sizing/selection?
-
Sisu22
- Gold Member
- Posts: 308
- Joined: Sun May 07, 2017 6:50 pm
- Home Port: Ventura, CA
Re: Repowered 28 TE with Cummins
Seconded. Were they with you on sea trial?go.boating wrote: ↑Mon Nov 16, 2020 2:23 pmblindsquirrel wrote: ↑Mon Nov 16, 2020 1:30 pm Install was Seaboard. Gear Ratio is 1.56/1.57. Noticed that most Albin 28TE's run 4 blade prop.
what did seaboard have to say about it?
tony knows his stuff
1994 TE 28' w/ Cummins 250