I have a 2000 32+2 CB and am planning on hauling the boat and removing the prop. It looks like there is not enough room between the end of prop shaft and the rudder to do that. Maybe if you turn the rudder you would get more room. Any knowledge of this would be appreciated.
Thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Removing the prop
-
Tomreese
- Swabby
- Posts: 3
- Joined: Fri Oct 26, 2018 9:24 pm
- Home Port: Coral gables Florida
-
Sanatee
- Gold Member
- Posts: 68
- Joined: Tue Mar 27, 2012 8:23 pm
- Home Port: Solomons Island
Re: Removing the prop
I've taken mine off on my 96 32+2 without problems. When you turn the rudder hard over yo should have room.
Mike and Carol
1996 32+2 CB "Sanatee"
Solomons Island MD
1996 32+2 CB "Sanatee"
Solomons Island MD