• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Min trailer load capacity

Albin's "power cruisers"
DesertAlbin736
Gold Member
Gold Member
Posts: 2729
Joined: Sun Mar 09, 2014 3:58 pm
Home Port: Peoria, AZ USA

Re: Min trailer load capacity

Post by DesertAlbin736 »

My utility trailer has a different kind, but similar system that I can inject grease into a zerk fitting in the center of the axle.
My trailer has that type, end caps with rubber covers to access the zerks to shoot grease directly to the bearings through the hollow hub spindle. In this older picture the tires were Carlisle. Since then have switched to Hartlands from the Discount Tire chain stores out here. 225R15 ST, Load Range E.
DSCN3668.JPG
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
tribologist
Gold Member
Gold Member
Posts: 970
Joined: Wed Jul 18, 2018 11:53 pm
Home Port: Groton. Ct

Re: Min trailer load capacity

Post by tribologist »

The speedi-sleeves are just a way to get a stainless optimal surface for the seals to ride on. I use evinrudes gasket sauce under them
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Driftless
A25 1971 #737
South Windsor, Ct
Post Reply

Return to “A25 / A27 - True Classics”