• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Gas, Bilge Switch Plate Repair

GPS, Sonar, Radar, Fishfinder, etc. Discuss electronics installation and upgrades.
Post Reply
Stapper
Mate
Mate
Posts: 11
Joined: Fri Aug 27, 2021 4:48 pm
Home Port: Lagoon City

Gas, Bilge Switch Plate Repair

Post by Stapper »

Just passing on an a plate replacement that I did for about $6. The old wood plate was rotting so I used a piece of thick plexiglass (6mill) and painted the bottom with black Tremclad. I taping off the top glass will painters tape to prevent overspray. I had to use a little silicone to secure the gas gage and I oversized the mounting holes to avoid cracking.
I just need to add navigation and wiper lables to the pull switches. Cheers Sandra
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Post Reply

Return to “Electronics”